Valhalla 2 Tonearm Cable +
In order to maximise the performance of an analog system, every aspect of your tonearm cable, including the conductor layout, quality of connectors, versatility in termination, and grounding capabilities, must be entirely optimized for its application. The Valhalla 2 Tonearm Cable + is the only cable on the market to excel at every one of these important design aspects, exceeding the performance requirements that high-quality analogue replay requires.
The V2 Tonearm Cable + uses four, silver-plated, solid core 99.999999% OFC conductors arranged in a twisted pair design to create a left and right channel, which are individually wrapped in a silver, braided shield, eliminating inter-channel cross-talk. In order to dramatically increase its signal speed, and expand the cable’s bandwidth capabilities, these conductors implement Nordost’s proprietary Dual Mono-Filament technology, reducing insulation contact by 85%. The construction also includes a separately shielded, silver-plated bond wire, wrapped in Micro Mono-Filament, which runs alongside the left and right channel.
To completely eliminate noise, Nordost has designed the most versatile solution on the market, including two, detachable, silver-plated ground whips, complete with Micro Mono-Filament technology. When needed, these ground whips connect to the cable’s shielding, totally eliminating any noise that could be introduced during signal transfer, regardless of the unique construction of the components being used in the sound system.
As with all Valhalla 2 cables, the Tonearm Cable + is cut to mechanically tuned lengths. This technique reduces the internal microphony and high-frequency impedance resonances of the cable. The V2 Tonearm Cable + is then terminated with Nordost’s proprietary HOLO:PLUG® Straight or 90° low-mass 5-pin Din, RCA, or XLR connectors, which have been specifically designed to accommodate the cable’s unique design. Using all of these technologies and innovations together, this reference-level tonearm cable delivers the most delicate signals seamlessly, while completely eliminating noise from the signal chain.
Lengths over 1.75m available: Add £805 per additional 1/2 meter
In order to maximise the performance of an analog system, every aspect of your tonearm cable, including the conductor layout, quality of connectors, versatility in termination, and grounding capabilities, must be entirely optimized for its application. The Valhalla 2 Tonearm Cable + is the only cable on the market to excel at every one of these important design aspects, exceeding the performance requirements that high-quality analogue replay requires.
The V2 Tonearm Cable + uses four, silver-plated, solid core 99.999999% OFC conductors arranged in a twisted pair design to create a left and right channel, which are individually wrapped in a silver, braided shield, eliminating inter-channel cross-talk. In order to dramatically increase its signal speed, and expand the cable’s bandwidth capabilities, these conductors implement Nordost’s proprietary Dual Mono-Filament technology, reducing insulation contact by 85%. The construction also includes a separately shielded, silver-plated bond wire, wrapped in Micro Mono-Filament, which runs alongside the left and right channel.
To completely eliminate noise, Nordost has designed the most versatile solution on the market, including two, detachable, silver-plated ground whips, complete with Micro Mono-Filament technology. When needed, these ground whips connect to the cable’s shielding, totally eliminating any noise that could be introduced during signal transfer, regardless of the unique construction of the components being used in the sound system.
As with all Valhalla 2 cables, the Tonearm Cable + is cut to mechanically tuned lengths. This technique reduces the internal microphony and high-frequency impedance resonances of the cable. The V2 Tonearm Cable + is then terminated with Nordost’s proprietary HOLO:PLUG® Straight or 90° low-mass 5-pin Din, RCA, or XLR connectors, which have been specifically designed to accommodate the cable’s unique design. Using all of these technologies and innovations together, this reference-level tonearm cable delivers the most delicate signals seamlessly, while completely eliminating noise from the signal chain.
Lengths over 1.75m available: Add £805 per additional 1/2 meter
In order to maximise the performance of an analog system, every aspect of your tonearm cable, including the conductor layout, quality of connectors, versatility in termination, and grounding capabilities, must be entirely optimized for its application. The Valhalla 2 Tonearm Cable + is the only cable on the market to excel at every one of these important design aspects, exceeding the performance requirements that high-quality analogue replay requires.
The V2 Tonearm Cable + uses four, silver-plated, solid core 99.999999% OFC conductors arranged in a twisted pair design to create a left and right channel, which are individually wrapped in a silver, braided shield, eliminating inter-channel cross-talk. In order to dramatically increase its signal speed, and expand the cable’s bandwidth capabilities, these conductors implement Nordost’s proprietary Dual Mono-Filament technology, reducing insulation contact by 85%. The construction also includes a separately shielded, silver-plated bond wire, wrapped in Micro Mono-Filament, which runs alongside the left and right channel.
To completely eliminate noise, Nordost has designed the most versatile solution on the market, including two, detachable, silver-plated ground whips, complete with Micro Mono-Filament technology. When needed, these ground whips connect to the cable’s shielding, totally eliminating any noise that could be introduced during signal transfer, regardless of the unique construction of the components being used in the sound system.
As with all Valhalla 2 cables, the Tonearm Cable + is cut to mechanically tuned lengths. This technique reduces the internal microphony and high-frequency impedance resonances of the cable. The V2 Tonearm Cable + is then terminated with Nordost’s proprietary HOLO:PLUG® Straight or 90° low-mass 5-pin Din, RCA, or XLR connectors, which have been specifically designed to accommodate the cable’s unique design. Using all of these technologies and innovations together, this reference-level tonearm cable delivers the most delicate signals seamlessly, while completely eliminating noise from the signal chain.
Lengths over 1.75m available: Add £805 per additional 1/2 meter
Valhalla 2 - Reference Cables
Valhalla 2 is Nordost’s Reference range of high performance audio cables. These exemplary products benefit from three decades of research and development, resulting in cutting edge production techniques and technological innovations.
Like all Nordost cables, Valhalla 2 starts with a strong foundation: silver-plated, OFC solid core conductors, extruded FEP insulation, a mechanically tuned construction, and asymmetrical grounding. However, that is just the beginning. The advances made from that jumping-point are astounding.
V2 cables use Dual Mono-Filament technology, Nordost’s patented process of separating the conductor from its FEP insulation. During production, each conductor is intricately and uniformly wrapped in a twisted pair of FEP Mono-Filament, before being encased in an extruded layer of high quality FEP. This intricate process allows every conductor to be surrounded by its own air dielectric, which is directly responsible for the dramatic increase of signal speeds and excellent mechanical damping of the cable. This technology, along with innovative, proprietary HOLO:PLUG® connectors, designed to be the best possible interface between the cable and component, propels the capabilities of our reference range to previously unattainable levels.
Tonearm Cables
The signals traveling between the turntable and the phono preamp are the most delicate in the analog audio system chain. It is therefore essential to use a dedicated, low-capacitance tonearm cable in your vinyl-sourced hifi system, in order to deliver every last nuance of musical detail contained in your LPs. Nordost combines the latest innovations in cable geometry, mechanical properties, and grounding solutions to produce a revolutionary line of tonearm cables. Every tonearm cable throughout Nordost’s extensive range of options, not only protects against signal loss and image smearing, but also eliminates noise from the signal chain in virtually any analog system.
Specifications
Insulation: High purity class 1.1 extruded Fluorinated Ethylene Propylene (FEP)
Conductors: 4 x 24 AWG
Construction: 2 Twisted pairs individually shielded. Mechanically tuned lay and lengths. Dual Mono-Filament design.
Material: Silver plated 99.999999% OFC Solid Core Conductors
Capacitance: 14.06pF/ft (46.0pF/m)
Overall Shield Coverage: 99%
Bond / Grounding Whips: 24 AWG silver-plated, stranded OFC, Micro Mono-Filament design.
Velocity of Propagation: 87%
Termination: HOLO:PLUG® Straight or 90° low-mass 5-pin Din, RCA, or XLR connectors. Whips and bond wire terminated with gold-plated 5mm spades.
Add £160 retail for 90° HOLO:PLUG® DIN connector – Must specify pin orientation (A,B,C, or D).
The V2+ tonearm cable follows the house V2 sound of exceptional transparency and stunning transient playback, without ever falling to the temptation of over-sharing the treble content. The midband and top are deliciously open and see-through, seamless and nearly organic in naturalness, while bass is disarmingly honest and musical in its flow. This is a staggeringly insightful wiring upgrade to hear what’s hiding in the groove.
Andrew Harrison, Hi-Fi+
