Tyr 2 Digital Interconnect
Tyr 2 S/PDIF and AES/EBU digital leads are produced using cutting-edge technology, adherence to standards, and precision in workmanship. This extra attention given to our cables during the production phase guarantees the tight tolerance of characteristic impedance necessary to ensure greater musical detail, virtually unimpeded by timing errors or destructive jitter. At their base, both the 75 Ohm and 110 Ohm cables are constructed using silver-plated, solid core, conductors which are suspended in Nordost’s patented Dual Mono-Filament technology, creating a virtual air dielectric. They also both benefit from the implementation of mechanically tuned lengths, which have been meticulously calculated to reduce internal microphony and high frequency impedance resonance in the cable. The combination of these technologies yields cables with the extreme bandwith necessary to accomplish zero-loss data transfer.
The function of these two cables is dictated by their differences in design and build. Tyr 2 75 Ohm S/PDIF Digital Interconnects employ a coaxial design and are terminated with gold-plated Neutrik BNC connectors for correct impedance matching. All Tyr 2 75 Ohm Interconnects are supplied with gold-plated RCA adapters to accommodate their function. Tyr 2 110 Ohm AES/EBU Digital Interconnects use a twinaxial design and are terminated with gold-plated Neutrik XLR connectors, ensuring that they maintain constant impedance throughout the cabling, as well as across terminations.
Lengths over 2m available: £410 per additional 1/2 meter
Tyr 2 S/PDIF and AES/EBU digital leads are produced using cutting-edge technology, adherence to standards, and precision in workmanship. This extra attention given to our cables during the production phase guarantees the tight tolerance of characteristic impedance necessary to ensure greater musical detail, virtually unimpeded by timing errors or destructive jitter. At their base, both the 75 Ohm and 110 Ohm cables are constructed using silver-plated, solid core, conductors which are suspended in Nordost’s patented Dual Mono-Filament technology, creating a virtual air dielectric. They also both benefit from the implementation of mechanically tuned lengths, which have been meticulously calculated to reduce internal microphony and high frequency impedance resonance in the cable. The combination of these technologies yields cables with the extreme bandwith necessary to accomplish zero-loss data transfer.
The function of these two cables is dictated by their differences in design and build. Tyr 2 75 Ohm S/PDIF Digital Interconnects employ a coaxial design and are terminated with gold-plated Neutrik BNC connectors for correct impedance matching. All Tyr 2 75 Ohm Interconnects are supplied with gold-plated RCA adapters to accommodate their function. Tyr 2 110 Ohm AES/EBU Digital Interconnects use a twinaxial design and are terminated with gold-plated Neutrik XLR connectors, ensuring that they maintain constant impedance throughout the cabling, as well as across terminations.
Lengths over 2m available: £410 per additional 1/2 meter
Tyr 2 S/PDIF and AES/EBU digital leads are produced using cutting-edge technology, adherence to standards, and precision in workmanship. This extra attention given to our cables during the production phase guarantees the tight tolerance of characteristic impedance necessary to ensure greater musical detail, virtually unimpeded by timing errors or destructive jitter. At their base, both the 75 Ohm and 110 Ohm cables are constructed using silver-plated, solid core, conductors which are suspended in Nordost’s patented Dual Mono-Filament technology, creating a virtual air dielectric. They also both benefit from the implementation of mechanically tuned lengths, which have been meticulously calculated to reduce internal microphony and high frequency impedance resonance in the cable. The combination of these technologies yields cables with the extreme bandwith necessary to accomplish zero-loss data transfer.
The function of these two cables is dictated by their differences in design and build. Tyr 2 75 Ohm S/PDIF Digital Interconnects employ a coaxial design and are terminated with gold-plated Neutrik BNC connectors for correct impedance matching. All Tyr 2 75 Ohm Interconnects are supplied with gold-plated RCA adapters to accommodate their function. Tyr 2 110 Ohm AES/EBU Digital Interconnects use a twinaxial design and are terminated with gold-plated Neutrik XLR connectors, ensuring that they maintain constant impedance throughout the cabling, as well as across terminations.
Lengths over 2m available: £410 per additional 1/2 meter
Norse 2 - High Performance Cables
The Norse 2 family is the second tier in Nordost’s product line, delivering the depth, precision, and nuance previously only found in live performances.
Norse 2 cables are constructed using silver-plated, OFC solid core conductors, extruded FEP insulation, and a mechanically tuned construction which, together, form the basis of Nordost’s great sound. Norse 2 cables build upon those fundamental elements, employing even further technological advances, unlocking the full potential that hifi audio systems have to offer.
After thirty years of extensive research and development, Nordost has perfected a proprietary technique called Mono-Filament technology, which creates a virtual air dielectric by winding an FEP filament in a precise spiral around each individual conductor before extruding an outer FEP “sleeve” around it. By minimizing contact with the conductor, Mono-Filament technology increases signal transfer speeds while enhancing mechanical damping and geometrical precision.
Nordost has also taken a step beyond its original mechanically tuned construction and introduced mechanically tuned lengths, reducing internal microphony and high-frequency impedance resonance.
Tyr 2
Nordost’s Tyr 2 cables are the top tier of our mid-range, Norse 2 family. The Tyr 2 range yields a realistic yet refined performance from your high-end components thanks to the superior technology it is produced with. The years of research and development put into Nordost’s Reference and Supreme Reference Ranges, such as Dual Mono-Filament technology and mechanically tuned lengths, as well as specially designed, proprietary MoonGlo connectors, have trickled down into the Tyr 2 products, while still maintaining Nordost’s core cable design to unify the cable’s sonic signatures. Tyr 2 cables provide the resolution, acumen and effortless musicality found in only the highest echelons of cables at a more realistic price point.
Digital Interconnects
It is vitally important to support your digital devices with cables that deliver the signal with the efficiency and consistency necessary to meet the demands of musical fidelity. Unfortunately, the precision and intricacy needed to produce a truly superb digital cable are out of reach for most cable manufacturers. Poor impedance matching has a dramatic impact on the accuracy with which the signal is passed from one electronic device to another. Nordost’s digital interconnects, on the other hand, implement the most advanced, proprietary technology and revolutionary techniques, ensuring the impedance matching necessary for S/PDIF and AES/EBU leads, guaranteeing the tight tolerance of characteristic impedance necessary to ensure greater musical detail, virtually unimpeded by timing errors or destructive jitter.
AES/EBU – 110 OHM Specifications
Insulation: Fluorinated Ethylene Propylene (FEP)
Construction: Mechanically tuned spacing, length and Dual Mono-Filament, twin-axial design
Conductors: 2 x 19 AWG
Material: Silver-plated 99.99999% solid core OFC
Capacitance: 11.0pF/ft
Impedance: 110 Ohm
Overall Shield Coverage: 97%
Velocity of Propagation: 88%
Termination: Gold-plated true 110 Ohm Neutrik XLR
Awards & Reviews
Warranty
Limited lifetime warranty
S/PDIF – 75 OHM Specifications
Insulation: Fluorinated Ethylene Propylene (FEP)
Construction: Mechanically tuned spacing, length and Dual Mono-Filament, co-axial design
Conductors: 1 x 18 AWG
Material: Silver-plated 99.99999% solid-core OFC
Capacitance: 15.9 pF/ft
Impedance: 75 Ohm
Overall Shield Coverage: 97%
Velocity of Propagation: 88%
Termination: Gold-plated true 75 Ohm Neutrik BNC. Gold-plated BNC to RCA adapter included.
The Nordost’s performance continued to improve past the 120-hour break-in to the extent that not only the bottom-end held more definition, the midrange to top-end became opened up and provided more detail as well.
Constantine Soo, Dagogo
