Norse 2 Bi-Wire Jumpers
After paying so much time and attention to the integrity of your sound system, why degrade its performance by neglecting the last few inches of crucial cabling. Nordost’s Norse 2 Bi-Wire Jumpers are the perfect solution for achieving exceptional sound by replacing the standard, bent metal plates and generic wires supplied with most bi-wire loudspeakers.
The Norse 2 jumper uses a silver-plated, solid core OFC conductor which is wrapped in a precise spiral of Micro Mono-Filament before being covered in an outer layer of FEP insulation and cut at a specific, mechanically tuned length. This dedicated design provides a straight-line, low-loss jumper that ensures optimum results. The difference that a well-engineered jumper makes in sound quality is astonishing, and these improvements are magnified that much more when maintaining the same core cable technology throughout.
After paying so much time and attention to the integrity of your sound system, why degrade its performance by neglecting the last few inches of crucial cabling. Nordost’s Norse 2 Bi-Wire Jumpers are the perfect solution for achieving exceptional sound by replacing the standard, bent metal plates and generic wires supplied with most bi-wire loudspeakers.
The Norse 2 jumper uses a silver-plated, solid core OFC conductor which is wrapped in a precise spiral of Micro Mono-Filament before being covered in an outer layer of FEP insulation and cut at a specific, mechanically tuned length. This dedicated design provides a straight-line, low-loss jumper that ensures optimum results. The difference that a well-engineered jumper makes in sound quality is astonishing, and these improvements are magnified that much more when maintaining the same core cable technology throughout.
After paying so much time and attention to the integrity of your sound system, why degrade its performance by neglecting the last few inches of crucial cabling. Nordost’s Norse 2 Bi-Wire Jumpers are the perfect solution for achieving exceptional sound by replacing the standard, bent metal plates and generic wires supplied with most bi-wire loudspeakers.
The Norse 2 jumper uses a silver-plated, solid core OFC conductor which is wrapped in a precise spiral of Micro Mono-Filament before being covered in an outer layer of FEP insulation and cut at a specific, mechanically tuned length. This dedicated design provides a straight-line, low-loss jumper that ensures optimum results. The difference that a well-engineered jumper makes in sound quality is astonishing, and these improvements are magnified that much more when maintaining the same core cable technology throughout.
Norse 2 - High Performance Cables
The Norse 2 family is the second tier in Nordost’s product line, delivering the depth, precision, and nuance previously only found in live performances.
Norse 2 cables are constructed using silver-plated, OFC solid core conductors, extruded FEP insulation, and a mechanically tuned construction which, together, form the basis of Nordost’s great sound. Norse 2 cables build upon those fundamental elements, employing even further technological advances, unlocking the full potential that hifi audio systems have to offer.
After thirty years of extensive research and development, Nordost has perfected a proprietary technique called Mono-Filament technology, which creates a virtual air dielectric by winding an FEP filament in a precise spiral around each individual conductor before extruding an outer FEP “sleeve” around it. By minimizing contact with the conductor, Mono-Filament technology increases signal transfer speeds while enhancing mechanical damping and geometrical precision.
Nordost has also taken a step beyond its original mechanically tuned construction and introduced mechanically tuned lengths, reducing internal microphony and high-frequency impedance resonance.Speaker Cables
Nordost’s most iconic products are our revolutionary, flat speaker cables. Due to the intricate extrusion process employed during fabrication, Nordost is the only audio cable manufacturer with the ability to achieve this unique cable design. The flat nature of Nordost’s speaker cables results in a far superior performance level than that of the commonly seen “round” variety. Nordost’s comprehensive range of loudspeaker cables take every factor into consideration: transfer speed, strand interaction, “skin effect”, and signal loss. The result is a line of fast, low-mass cables with low resistance and impedance that cannot be replicated or out-performed by any other brand in the industry.
Bi-Wire Jumpers
Your sound system is only as strong as its weakest link, which is exactly why even the jumper cables attached to your loudspeakers are an integral part of your cable loom. Those last few inches of crucial cabling ensure that the sonic signature that you have invested in throughout your entire system is maintained between your loudspeaker and the binding posts. Nordost’s bi-wire jumpers improve upon the standard metal plates and generic wires supplied with most bi-wire loudspeakers, and replace them with the same groundbreaking technology and cable philosophy that you have already entrusted to upgrade your entire system.
Specifications
Insulation: Fluorinated Ethylene Propylene (FEP)
Construction: Mechanically tuned spacing, length and Micro Mono-Filament design
Conductors: 1 x 16 AWG
Material: Solid core, silver-plated 99.99999% OFC
Capactiance: 2.75 pF/ft
Inductance: 0.5 µH/ft
Velocity of Propagation: 96%
Termination: Gold-plated Spade or Z-plug Banana
Add £12 retail ea. for Large Spades (8.5mm)
The Norse 2 [Bi-Wire Jumper]…matches its task very well, offering all the refinement you would expect from a set of high-end cables and so is a sensible upgrade to the metal links fitted to so many speakers . . .
Neville Roberts, Hi-Fi Choice
