Heimdall 2 Analogue Interconnects
Norse 2 Series interconnects deliver a level of performance not previously possible at their price points. Nordost’s proprietary Dual Mono-Filament construction, first introduced in the legendary Valhalla reference cables, creates a virtual air dielectric, complete with an elegantly engineered suspension system. When combined with silver-plated OFC solid core conductors and FEP insulation throughout, the result is the ideal electrically and mechanically controlled construction for ultra-fast, low-loss signal transfer. Optimized conductor dimensions significantly extend the musical performance of the Norse 2 Series, finally allowing your equipment to deliver its full performance potential, while the consistency of design and materials across the entire Norse 2 Series means that you can easily prioritise a system-wide solution without compromising the coherence of your cables.
Lengths over 2m available: £290 per additional 1/2 meter pair
Norse 2 Series interconnects deliver a level of performance not previously possible at their price points. Nordost’s proprietary Dual Mono-Filament construction, first introduced in the legendary Valhalla reference cables, creates a virtual air dielectric, complete with an elegantly engineered suspension system. When combined with silver-plated OFC solid core conductors and FEP insulation throughout, the result is the ideal electrically and mechanically controlled construction for ultra-fast, low-loss signal transfer. Optimized conductor dimensions significantly extend the musical performance of the Norse 2 Series, finally allowing your equipment to deliver its full performance potential, while the consistency of design and materials across the entire Norse 2 Series means that you can easily prioritise a system-wide solution without compromising the coherence of your cables.
Lengths over 2m available: £290 per additional 1/2 meter pair
Norse 2 Series interconnects deliver a level of performance not previously possible at their price points. Nordost’s proprietary Dual Mono-Filament construction, first introduced in the legendary Valhalla reference cables, creates a virtual air dielectric, complete with an elegantly engineered suspension system. When combined with silver-plated OFC solid core conductors and FEP insulation throughout, the result is the ideal electrically and mechanically controlled construction for ultra-fast, low-loss signal transfer. Optimized conductor dimensions significantly extend the musical performance of the Norse 2 Series, finally allowing your equipment to deliver its full performance potential, while the consistency of design and materials across the entire Norse 2 Series means that you can easily prioritise a system-wide solution without compromising the coherence of your cables.
Lengths over 2m available: £290 per additional 1/2 meter pair
Norse 2 - High Performance Cables
The Norse 2 family is the second tier in Nordost’s product line, delivering the depth, precision, and nuance previously only found in live performances.
Norse 2 cables are constructed using silver-plated, OFC solid core conductors, extruded FEP insulation, and a mechanically tuned construction which, together, form the basis of Nordost’s great sound. Norse 2 cables build upon those fundamental elements, employing even further technological advances, unlocking the full potential that hifi audio systems have to offer.
After thirty years of extensive research and development, Nordost has perfected a proprietary technique called Mono-Filament technology, which creates a virtual air dielectric by winding an FEP filament in a precise spiral around each individual conductor before extruding an outer FEP “sleeve” around it. By minimizing contact with the conductor, Mono-Filament technology increases signal transfer speeds while enhancing mechanical damping and geometrical precision.
Nordost has also taken a step beyond its original mechanically tuned construction and introduced mechanically tuned lengths, reducing internal microphony and high-frequency impedance resonance.
Heimdall 2
Nordost’s Heimdall 2 cables are the first tier in our mid-range, Norse 2 family. Using the same core design as our entry-level products, Heimdall 2 cables maintain consistency with the Leif ranges. This continuity ensures similar sonic signatures between our cables, allowing for a seamless transfer as one upgrades throughout Nordost’s lines.
In addition to the already impressive core design, Heimdall 2 cables use innovative techniques and technologies that were first seen in the acclaimed and much sought after Valhalla and Odin ranges. Advances such as Dual Mono-Filament technology and mechanically tuned lengths as well as specially designed, proprietary MoonGlo connectors all make appearances throughout the Heimdall 2 range. Just by taking the first step into the Norse 2 family you will notice significant differences in your sound. With the switch of even one cable you’ll hear banal recordings transform into high fidelity performances.
Offering the most variety of any of our extensive product lines, Heimdall 2 cables run the gamut including power, speaker, interconnect, personal audio cables and more. Each cable in the Heimdall 2 range provides clarity, definition and detail to sound that is otherwise unheard of in this price range.
Analogue Interconnects
Your sound system deserves an audio cable that will allow your hifi components to shine—maximizing signal transmission without the distracting, and often degrading, effects of filtration and tonal enhancements. Nordost produces low-mass interconnects with optimal signal transfer speed and perfect impedance matching, which impart a neutral presence on your system, letting your components perform as they were intended. The defining factor in our signal cables isn’t found in filters, or rare exotic materials, but rather in precise manufacturing techniques and groundbreaking technology. Nordost’s neutral solution to cabling produces the perfect interconnects for any level sound system.
Specifications
Insulation: Fluorinated Ethylene Propylene (FEP)
Construction: Mechanically tuned lay, length and Dual Mono-Filament design
Conductors: 4 x 24 AWG
Material: Silver-plated 99.99999% solid-core OFC
Capacitance: 25.0pF/ft
Inductance: 0.06μH/ft
Overall Shield Coverage: 97%
Velocity of Propagation: 85%
Termination: Gold-plated Nordost MoonGlo® RCA or XLR
Add £60 per 5-pin or 4-pin Din connector
I first introduced the analog interconnects …the first thing I noticed was a deeper soundstage – there was added clarity but also a greater sense of ease. The hi-hat now took on a very life-like presence with added detail and now Shelby’s voice was entrancingly real – more resolved and more focused. Bass guitar was more extended with another level of tightness and agility that brought across its texture in a new manner – now, not only was the vibration of the strings easily audible at the pluck but lucidly throughout the entire note, pluck to pluck. I found myself thinking – this is no longer hearing, this is feeling the music.
George de Sa, Novo
